Skip to content
FiberGridSolutions

FiberGrid Solutions

OSP EngineeringBuilt for Scale.

Specialized engineering support for fiber deployments, make-ready projects, pole analysis, and construction-ready OSP design.

  • MAKE-READY
  • OSP DESIGN
  • KATAPULT PRO
  • O-CALC PRO
  • QA/QC

Engineering Services

Specialized support across the OSP engineering lifecycle.

FiberGrid provides focused engineering capacity for telecom contractors, engineering firms, and network operators — from field-data preparation through final engineering deliverables.

Make-Ready Engineering

Engineering support for attachment and clearance analysis, make-ready recommendations, pole replacement evaluation, communication relocation requirements, and project documentation.

  • Attachment & clearance analysis
  • Make-ready recommendations
  • Pole replacement evaluation
  • Engineering documentation

OSP & Fiber Design

OSP design support for fiber deployments, from preliminary route development through detailed construction-ready engineering.

  • Route development
  • Preliminary engineering
  • Fiber infrastructure design
  • Construction-ready deliverables

Field Data & Katapult

Structured preparation and review of field data to create reliable inputs for downstream engineering and design workflows.

  • Pole-data review
  • Photo association
  • Annotation & tracing
  • Field-data validation

Pole Analysis & QA/QC

Engineering analysis and quality-control support focused on producing consistent, review-ready project deliverables.

  • Pole loading analysis
  • O-Calc workflows
  • Engineering calculations
  • Design verification & package review

How We Work

From field data to construction-ready design.

A structured workflow designed to integrate with established project requirements and keep engineering deliverables consistent from intake through final review.

  1. Field Data

    Review project inputs, pole information, imagery, and available field documentation.

  2. Engineering Analysis

    Evaluate attachments, clearances, existing conditions, and project requirements.

  3. OSP Design

    Develop the required make-ready or OSP engineering solution.

  4. QA / QC

    Review calculations, design decisions, documentation, and package consistency.

  5. Delivery

    Prepare organized engineering deliverables for client review and downstream project use.

Technical Capabilities

Built around real OSP engineering workflows.

FiberGrid combines field-data preparation, make-ready analysis, OSP design, pole analysis, and structured QA/QC to support engineering teams throughout the project lifecycle.

Make-Ready

  • Attachment analysis
  • Clearance review
  • Pole replacement evaluation
  • Communication relocation requirements
  • Make-ready recommendations
  • Design verification

OSP / Field Data

  • Pole-data review
  • Photo association
  • Annotation
  • Tracing
  • Route development
  • Field-data validation

Engineering

  • Pole loading analysis
  • O-Calc workflows
  • Engineering calculations
  • Design review
  • QA/QC
  • Post-inspection support

Project Workflows

  • Preliminary engineering
  • Application review support
  • Engineering documentation
  • Package preparation
  • Construction-ready deliverables
  • Client-specific workflow integration

Engineering Technology

Tools that support the workflow.

Katapult Pro

Field-data preparation, annotation, tracing, photo association, and engineering workflow support.

O-Calc Pro

Pole loading analysis and engineering calculation workflows supporting make-ready design.

Why FiberGrid

Engineering capacity, when your team needs it.

FiberGrid is built to support engineering teams when project demand exceeds internal capacity. Whether the need is a focused project, overflow production, or ongoing engineering support, we work within established project requirements and engineering workflows.

  1. Project Support

    Additional engineering resources for a defined deployment, backlog, or project requirement.

  2. Overflow Capacity

    Flexible engineering support when internal teams need additional production capacity.

  3. Ongoing Support

    Consistent engineering capacity designed to integrate with recurring production workflows.

Your workflow.
Additional capacity.

FiberGrid adapts to client standards, deliverable requirements, review processes, and project-specific workflows — allowing engineering support to fit into the way your team already operates.

Project Requirements
Work aligned to defined client and project standards.
Workflow Integration
Support structured around established engineering processes.
Quality Control
Consistent review before deliverables move downstream.
Flexible Capacity
Support that can scale with project workload.
Discuss Your Engineering Needs

Demonstration Project

Make-ready engineering, from route review to proposed solution.

A fictional 10-pole fiber attachment route illustrating how field conditions, existing infrastructure, clearance requirements, structural considerations, and route constraints can influence make-ready engineering decisions.

FICTIONAL / SANITIZED ENGINEERING EXAMPLE

Created solely to illustrate workflow and reasoning; this is not a real client project. All pole identifiers are fictional. Graphics are conceptual, not to scale, and are not final engineering drawings or construction specifications.

Project type
Proposed fiber attachment
Route
10 existing poles
Scope
Route review / field-data review / make-ready analysis
Output
Proposed make-ready requirements and engineering deliverables
Original requested route / 10 polesConceptual · Not to scale
Fictional route, vertical schematicTen poles in sequence. Review riser conflict at P-03, available space at P-06, and the route-end constraint at P-10. This schematic shows route order, not measured geometry.P-01P-02P-03RISERP-04P-05P-06POLE HEIGHTP-07P-08P-09P-10ROUTE END
  • Existing infrastructure
  • Proposed fiber
  • Review location

Demonstration workflow

  1. Application / route review
  2. Pre-design
  3. Field data
  4. Photo association & tracing
  5. Proposed attachment design
  6. Make-ready analysis
  7. Pole analysis / calculations as required
  8. QA / QC
  9. Engineering deliverables

P-03 / Through-bolt / riser conflict

Existing condition
The existing secondary riser is positioned within the potential path of the proposed attachment hardware. With the proposed cable continuing through the pole, the through-bolt arrangement creates a conflict with the riser location.
Engineering review
Review the proposed cable direction, through-bolt orientation, and riser position to ensure the attachment hardware does not interfere with the secondary riser.
Proposed make-ready
Reposition / rotate the secondary riser away from the through-bolt path. For this conceptual example, the riser is shifted to an approximately 45° or 315° position, subject to project requirements.

Plan view / conceptual three-bolt attachment

Existing / north-face riser
N / 0°315°45°S / 180°W / 270°E / 90°Pole

BOLT PATH / RISER CONFLICT

The north end / projection of the through-bolt meets the secondary riser on the 0° face, creating a potential contact or puncture conflict.

Proposed / rotate secondary riser
N / 0°315°45°S / 180°W / 270°E / 90°Pole

RISER CLEAR OF BOLT PATH

The secondary riser is shown at approximately 45°. The dashed outline at 315° illustrates an alternative position away from the north bolt path.

  • Cable direction: 90° ↔ 270° / east–west
  • Through-bolt direction: 0° ↔ 180° / north–south
  • Circular outline: secondary riser

Conceptual orientation only; not to scale. The illustrated 45° / 315° positions are specific to this demonstration, not universal requirements. Final riser positioning and attachment hardware are subject to project-specific review.

P-06 / Available space / pole height

Existing condition
Existing equipment is positioned low enough on the pole that adequate usable space for the proposed communication attachment is limited.
Engineering review
Evaluate equipment position, pole height, adjacent pole configuration, ground elevation, and the resulting cable profile. The engineering decision should not treat the pole in isolation.
Proposed make-ready
A taller replacement pole is illustrated as the demonstration solution. Adjacent pole heights and route grading must also be considered, subject to project requirements.
Existing pole
P-05P-06P-07

Low equipment position limits usable attachment space. Adjacent poles and changing ground elevation are part of the review.

Proposed replacement
P-05P-06P-07

A taller conceptual replacement creates room to evaluate the attachment profile together with adjacent poles and route grading.

P-10 / Route-end / guying constraint

Existing condition
The requested attachment route terminates at a location where the required guying arrangement cannot be feasibly installed because of the surrounding roadside / pedestrian-area constraint.
Engineering review
Review the route endpoint, tensioning requirements, surrounding conditions, and continuation options.
Proposed solution
Extend the proposed route to an appropriate pole beyond the original route limit, subject to required ownership / attachment review, allowing the route termination and supporting arrangement to be properly evaluated.
Conceptual plan / route continuation
ROADWAYP-10 / original endpointConstrained areaProposed extensionCandidate continuation pole

The pedestrian / roadside area limits the original guying arrangement. A continuation pole and revised termination are options for review, subject to ownership, attachment, crossing, and project requirements—not a universal solution.

The route is the system.

Make-ready decisions are not always isolated to a single pole. Pole height, equipment position, ground elevation, span conditions, structural capacity, route limits, and adjacent infrastructure can influence the final engineering solution.

From field conditions to actionable deliverables.

The objective is to identify the work required for a proposed attachment and organize those requirements into clear engineering deliverables for client review and downstream project use.

Start a Project

Need additional OSP engineering capacity?

Whether you're working through a project backlog, preparing a new fiber deployment, or need additional Make-Ready production capacity, tell us what you're working on.

Your workflow. Additional capacity.

What happens next

  1. Project Review

    We review the project scope, workflow, and required engineering support.

  2. Alignment

    We determine how FiberGrid can support the existing process, requirements, and deliverables.

  3. Next Step

    If there is a fit, we define an initial scope and determine the appropriate way to begin working together.

Project inquiry

Tell us about your project and where your team needs engineering support.

All fields are required.

Project inquiry details
What do you need support with?

Select one or more.

Approximate project scope

Please do not include confidential project data in this initial inquiry.